Educational

The main purpose of this theme is. Because there are some customers. When they find the flow rate is not enough. They will try to find bigger pumps with higher flow rate. But in fact it did not improve his current situation. Just because of the tube. The cross-sectional area is too small. It will […]

Aiming at the power consumption variances. It is aiming when the pressure rises, the power consumption will increase. The oilless air compressor being used now is UN-180P, then we use pressure gauge to indicate the increased pressure which goes through valve control to achieve this physical phenomenon. The Initial pressure as you can see is

It is mainly for that when the vacuum increases, contrary, the power consumption will decrease. To introduce such kind of characteristic, we have prepared a power supply. This power supply can output a stable voltage and stable frequency. While outputting, it will show current and power consumption. The pump we have prepared is UN-200V, a

Relief Valve Over high pressure using shall be avoid in closed piping loop for side channel blower, otherwise deformation and break may occur to side channel blower due to temperature raise or over load, adjustable pressure & vacuum relief valve shall be installed to protect motor. Blower Series Quick Link   Related Products

Today I want to introduce you a simple physical phenomenon Called “back pressure” Why cause this problem? Because the negative pressure is still in the pump head When I turn it off and then turn it on again Then the negative pressure will be stuck the pump head and Caused the pump could not be